Still KANVAN-05 страница 22 Скачать руководство пользователя

Страница: 22 / 164

Introduction

Operating the truck

Intended use of the trucks

CAUTION

This machine is designed to tow industrial trailers

and for the storage of loads packed on pallets or in

industrial containers designed for this purpose.
The dimensions and capacity of the trailers, pallets

or containers must be adapted to the load being

transported and must ensure stability.
The table of characteristics and performance

attached to this user manual gives you some of the

information you need to check that the equipment

is suitable for the work being carried out.
Any speciﬁc usage must be authorised by the

site manager; an analysis of the potential risks

associated with this usage will enable him to put in

place any necessary additional safety measures.

CAUTION

Never use the trailer mode and the pallet stacker

mode at the same time!
This machine can be operated in trailer mode OR

pallet stacker mode.
Therefore, it is prohibited to tow a trailer and stack

another load at the same time.

Approved applications

The truck is suitable for carrying and transport-

ing loads in a way described and shown in this

manual.
If the truck is to be used in a way other than

established in the operating instructions, the

written approval of the manufacturer and,

if necessary, of the responsible authorities

must be obtained beforehand to prevent any

potential dangers.
The maximum load that can be towed is

speciﬁed on the drawbar pull plate. Do not

exceed the maximum load capacity.

Unintended use

Any danger due to unauthorised use becomes

the responsibility of the operator or driver and

50108043033 [EN]

Содержание KANVAN-05





































































































































































Результаты поиска

Содержание KANVAN-05

Отзывы:

Похожие инструкции для KANVAN-05

Бренды по названию

Популярные бренды

Still KANVAN-05, Оригинальное руководство пользователя

Результаты поиска

Содержание KANVAN-05

Отзывы:

Похожие инструкции для KANVAN-05

Бренды по названию

Популярные бренды