Still EXD-S 20 Скачать руководство пользователя страница 82

Страница: 82 / 144

Driving assistance system: Dynamic Drive Control

Description of the Dynamic Drive Control

The Dynamic Drive Control option is a sys-

tem that assists when driving and using the

truck.
The forklift operator must remain vigilant un-

der all circumstances and adhere to the truck

capacity plate.

CAUTION

Risk of accident.
Despite this option, the forklift operator must remain

vigilant. The safety guidelines must be observed.

The load on the load arms must be greater

than or equal to the load on the forks.

The maximum speed of the truck depends on

the height of the forks.
The speed varies depending on the load on

the forks between 0.3 and 1.8 metres. The

heavier the load, the lower the speed.
The forklift operator must remain cautious and

adjust the speed to suit the environmental

conditions.

CAUTION

Risk of incorrect use of the truck.
The forklift operator must be trained in and familiar

with the various features of this option.

Use

Driving assistance system: Dynamic Drive Control

11638011751 EN - 02/2021 - 03

Содержание EXD-S 20

















































































































































Результаты поиска

Содержание EXD-S 20

Отзывы:

Похожие инструкции для EXD-S 20

Бренды по названию

Популярные бренды

Still EXD-S 20, Оригинальное руководство пользователя

Результаты поиска

Содержание EXD-S 20

Отзывы:

Похожие инструкции для EXD-S 20

Бренды по названию

Популярные бренды