Still EXD 20 Скачать руководство пользователя страница 97

Страница: 97 / 146

–

Attach the slinging hooks to the battery

compartment.

NOTE

Using secured hooks is recommended.

–

Lift the battery. Take care not to hook onto

the upper bridge piece of the mast.

–

Replace the battery.

–

Position the new battery in the chassis.

–

Remove the slinging hooks.

–

Reconnect the battery connector.

–

Close the battery hood.

–

Return the truck to service.

Changing the side access battery

DANGER

Risk of trapping fingers
It is advisable to wear gloves when changing the bat-

tery.

WARNING

Risk of injury
Safety shoes must be worn when changing the bat-

tery.
Before handling, ensure that there is nobody around

the truck.

To remove the battery, we recommend that

you use a fixed roller frame or a truck with ex-

traction rollers (fitted with rollers) for easier

handling of the battery.
To change the battery, proceed as follows:

–

Immobilise the truck.

–

Lower the forks.

–

Switch off the ignition and remove the key.

–

Press in the emergency off switch.

–

Open the battery hood.

–

Disconnect the battery connector.



Use

Handling the battery

11638011551 EN - 02/2021 - 06

Содержание EXD 20



















































































































































Результаты поиска

Содержание EXD 20

Отзывы:

Похожие инструкции для EXD 20

Бренды по названию

Популярные бренды

Still EXD 20, Оригинальное руководство пользователя

Результаты поиска

Содержание EXD 20

Отзывы:

Похожие инструкции для EXD 20

Бренды по названию

Популярные бренды