Still EXD 18, Оригинальное руководство пользователя

Страница: 118 / 146

Stabiliser maintenance
EXD18 trucks are equipped with two damper
stabilisers (1). They ensure the dynamic sta-
bility of the truck.
Stabilisers do not require any specific mainte-
nance or adjustment work. Wheel wear (drive
wheel and stabiliser wheel) is automatically
compensated.
However, it is necessary to check the condi-
tion of the stabilisers:
●
no significant damage to the superstructure
(2).
●
the damper cylinder pins must not be twis-
ted.
●
no oil leakage must be present on the
damper cylinder. This cylinder must be in-
side the spiral spring.
●
no damage to the rollers (3). The wheels
must rotate freely.
●
no locking at the level of the upper bearing
(4).
●
ensure that the wheel nuts are correctly
tightened.
WARNING
Risk of loss of dynamic stability
The dynamic behaviour of the device must be moni-
tored, particularly when taking bends. The behaviour
of the truck must be the same when cornering,
whether turning to the left or right. If there is a differ-
ence in behaviour, please contact the After-Sales
Service Centre. Only the technician can replace the
two stabilisers if deemed necessary.

Maintenance
5
Steering and wheels
108 1160 801 15 51 EN - 02/2021 - 11