Stilevs MAXTRON PREMIUM EVS-1235, Руководство пользователя

Страница: 12 / 20

12
II. GENERAL DESCRIPTIONS
1. On / Off button
2. Cord rewinder button
3. Digital suction power control
4. Horizontal parking nest
5. Wheel
6. Suction hose nest
7. Hepa Filter cover
8. Sponge filter
9. HEPA Filter
10. Hepa filter cover release button
11. High efficiency main brush
12. EYE Brush with pedal
13. Brush locking latch
14. Light switch button
15. Suction control valve
16. EYE Brush battery compartment
17. Turbo brush
18. Small brush with hair
19. Crevice nozzle
20. Small brush
21. Hose
22. Hose connection
23. Handle with remote control
24. Telescobic tube
25. Handle locking latch
26. Filter
27. Sponge filter
28. Dust container
29. Dust container lid open button
30. Dust container release button
31. Dust container full indicator
32. Motor filter protection switch
III. SPECIFICATIONS
Brand : Stilevs
Model : Maxtron Premium
Model No : EVS-1235
Voltage : 220-240V
Frequency : 50/60Hz.
Power : 800W
IV. USING THE APPLIANCE
Always remove the plug from the
cord, or pull cord around sharp
edges or corners. Do not run
vacuum cleaner over cord. Keep
cord away from heated surfaces.
• Do not unplug by pulling on cord. To
unplug, grasp the plug, not the cord.
• Do not handle plug or vacuum
cleaner with wet hands.
• Do not put any object into
openings. Do not use with any
opening blocked. Keep
• free of dust, lint, hair and
anything that may reduce airflow.
• Keep hair, loose clothing, fingers
and all parts of body away from
openings and moving parts.
• Turn all controls off before
unplugging.
• Use extra care when cleaning on
stairs.
• Do not use to pick up flammable
or combustible liquids, such as
gasoline, or use in areas where
they may be present
• Hold plug when rewinding onto
cord reel. Do not allow plug to
whip when rewinding.
• Unplug before connecting the
hose
• Do not pick up anything that
is burning or smoking, such as
cigarettes, matches, or hot ashes.
• Do not use without dust bag and/
or filter in place.
• If the supply cord is damaged,
it must be replaced by the
manufacturer or its service agent
or a similarly qualified person in
order to avoid a hazard.
SAVE THESE INSTRUCTIONS