13
performed more often.
• Power cable and plug must be checked while cleaning the device. If there is a
deformation in the power cord or the plug, it must be taken to the authorized
service.
• Reflector, wire and body deformation must be visually inspected while cleaning
the device. If there is a deformation, authorized service must be called for things
to do.
• It is recommended that the reflector is changed every 2 years for the device to
run more efficiently. Reflector must be changed by authorized service. A clean
reflector ensures the maximum level of heating efficiency.
Cleaning:
Attention: Regular and careful cleaning performed by the user will ensure that
your device will run more efficiently and prolong its life.
• Your device must be turned off before starting to clean, its power cord must be
unplugged from the socket for safety and you must wait until it cools down.
• If the reflector (reflecting mirror) and carbon flament tube is dirty, it must be
cleaned from the outside with a dry air without opening the protective heater
wire of the device, if posibble.
• The outer surface of the device must be cleaned with a soft cotton cloth or soft
brush.
• Never use corrosive or melting liquids to clean the heater. These materials may
damage the plastic parts.
• Do not clean your device using vapor cleaners.
AEEE
This marking indicates that this product should
not be disposed with other household wastes
throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To
return your used device, please use the return
and collection systems or contact the retailer
where the product was purchased. They can take
this product for environmental safe recycling.
