16
English / USA
SP 200
Fitting Straps with Carrying Rings
:
Attach one of the straps to the front
end of the drive tube (
1
) and the
other to the engine end of the drive
tube (
2
).
Do not wrap the strap around the
throttle cable.
3
Short strap
4
Long strap
5
Ring
6
Carrying ring
:
Wrap the shorter strap (
3
) tightly
around the drive tube and close the
Velcro fastener.
:
Thread the longer strap (
4
) through
the ring (
5
).
:
Grip the end of the strap and pull it
tight.
:
Hold the carrying ring (
6
) steady,
tighten the strap, wrap it around the
drive tube and close the Velcro
fastener.
A properly adjusted throttle cable is
the precondition for correct
operation in the full throttle, starting
throttle and idle positions.
Adjust the throttle cable only after
the unit is fully assembled – the
handle must be in the normal
operating position.
:
Use a suitable tool to push the slide
to the bottom of the slot (see
illustration).
*
see "Guide to Using this Manual"
Fitting the Carrying Rings
2
411BA017 KN
1
3
411BA018 KN
4
6
5
3
411BA019 KN
5
4
411BA020 KN
6
Adjusting the Throttle
Cable*
002BA163 KN
