manualshive.com logo in svg

Stihl SH 56, Инструкция по эксплуатации, Страница: 22 / 32

Поделиться
Скачать
Stihl SH 56 Скачать руководство пользователя страница 22

BG 56, BG 56 C, BG 66, BG 66 C, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C

English

20

If engine running behavior is 

unsatisfactory even though the air filter 

is clean and the carburetor is properly 

adjusted, the cause may be the muffler.
Have the muffler checked for 

contamination (carbonization) by your 

servicing dealer.
STIHL recommends that you have 

servicing and repair work carried out 

exclusively by an authorized STIHL 

servicing dealer.

To help prolong the wear life of the 

starter rope, observe the following 

points:

N

Pull the starter rope only in the 

direction specified.

N

Do not pull the rope over the edge of 

the guide bushing.

N

Do not pull out the rope more than 

specified.

N

Do not allow the starter grip to snap 

back, guide it back into the housing 

slowly – see chapter on "Starting / 

Stopping the Engine."

Have a damaged starter rope replaced 

by your dealer before it breaks 

completely. STIHL recommends that 

you have servicing and repair work 

carried out exclusively by an authorized 

STIHL servicing dealer.

For periods of 3 months or longer

N

Drain and clean the fuel tank in a 

well ventilated area.

N

Dispose of fuel properly in 

accordance with local 

environmental requirements.

N

Run the engine until the carburetor 

is dry – this helps prevent the 

carburetor diaphragms sticking 

together.

N

Thoroughly clean the machine – pay 

special attention to the cylinder fins 

and air filter.

N

Store the machine in a dry, high or 

locked location, – out of the reach of 

children and other unauthorized 

persons.

Engine Running Behavior

Rewind Starter

Storing the Machine

Содержание SH 56

































Отзывы:

Нет отзывов