There are three measuring cups in the cap. They
can be used to prepare the plant protection solu‐
tion.
1 5 ml (0.2 fl.oz)
2 10 ml (0.3 fl.oz)
3 25 ml (0.8 fl.oz)
5.3
Spray Gun
Unlocking / locking spray gun
1
2
000001
1028_002
► Push locking lever (1) upwards – the trig‐
ger (2) is unlocked and can be operated.
1
2
000001
1015_002
► Push the locking lever (1) downwards – the
trigger (2) is locked to reduce the risk of acci‐
dental operation.
6
Filling the Container
Before filling the tank with chemicals, carry out a
test with fresh water and check all parts of the
sprayer for leaks.
max
8014BA013 AS
► Stand the sprayer on a level surface.
► Remove the cap from the tank.
8014BA012 AS
1
2
► Check the O-ring (1) in the cap (2).
It must be in good condition.
max
8014BA01
1 AS
► Fill up with thoroughly mixed plant protection
solution – do not overfill (no further than max.
mark – arrow).
8014BA021 AS
► Fit the cap and tighten it down firmly with both
hands.
7
Spraying
► Carry the unit on your back with both harness
straps – do not hang it over one shoulder.
► Operate the pump lever slowly and steadily
with the gun closed – several strokes are
required to build up pressure.
► Operate the gun and always pay attention to
the optimal working pressure while spraying.
► If the working pressure drops more than
0.5 bar (7.25 PSI) , restore it by operating the
pump handle.
6 Filling the Container
English
0458-597-0121-C
9
