Stihl RMI 522 C, Инструкция по эксплуатации

Страница: 44 / 96

0478 131 8365 C - EN
42
The name of the robotic mower
(
Ö 10.) and the text "iMOW® ready
for op." are displayed in the bottom
area of the screen together with the
symbol shown, the automatic mowing
status (
Ö
15.4) and information on GPS
protection ( Ö 5.9).
Status information during running
activities:
The text "iMOW® mowing lawn" and
a corresponding symbol are shown
on the display during a running
mowing operation . The text and symbol
are adapted to the respective active
operation.
The text "Attention – iMOW® starting" and
a warning symbol are displayed
before
the mowing operation .
Edge mowing :
While the robotic mower mows the
edges of the mowing area, the text
"Mowing edge" is displayed.
Drive to docking station :
When the robotic mower returns to
the docking station, the relevant
reason is indicated in the display
(e.g. Battery discharged, Mowing
completed).
Battery charging :
The text "Charging battery" appears
during charging of the battery.
Approach starting points :
When the robotic mower
approaches a starting point when a
mowing operation starts, the text
"Approaching starting point" is displayed.
Travel to desired zone :
When the robotic mower
approaches a desired zone when a
mowing operation starts, the text "Travel to
desired zone" is displayed.
Message screen:
Errors, faults or recommendations are
displayed together with warning symbol,
date, time and message code. If several
messages are active, they appear
alternately. (
Ö 23.)
11.3 Information area
The following information is shown in the
top right corner of the display:
1. Charge state of the battery or charging
in progress
2. Automatic mowing status
3. Time
4. Mobile radio signal
1. Charge state:
The battery symbol serves to
indicate the charge state.
No bars – battery discharged
1 to 5 bars – battery partially
discharged
6 bars – battery fully charged
During charging, the mains plug
symbol is shown instead of the
battery symbol.
2. Automatic mowing status:
When automatic mowing is switched
on, the
Automatic symbol appears.
Flashing of the display illumination
and a signal tone additionally
indicate the impending start of the
mowing motor. The mowing blade
is only activated a few seconds
after the robotic mower has been
set into motion.
The message and status
information appear alternately if the
robotic mower is ready for
operation.