0478-131-3045-A
144
español / EE.UU
15 Ajustes
Nueva instalación
Puntos de partida
Verificar borde
► Para revisar el tendido del cable en torno a superficies
excluidas, coloque el robot cortacéspedes en la superficie
de corte con la parte delantera orientada hacia la
superficie excluida y comience el ensayo.
Corte del borde
► Seleccione una de estas tres opciones:
– Never (Nunca): Nunca se cortarán los bordes.
– Once (Una vez, opción predeterminada): Se cortarán
los bordes una vez por semana.
– Twice (Dos veces): Se cortarán los bordes dos veces
por semana.
Superficies contiguas
► Active esta función para habilitar el corte de una zona
contigua.
15.4 Seguridad
Dispositivo inhabilitador
► Para desactivar el dispositivo inhabilitador, pulse la
secuencia de botones ilustrada en la pantalla. Una vez
que se desactive el dispositivo inhabilitador, se podrá
volver a utilizar el cortacéspedes robot.
Nivel
► Seleccione una de las cuatro opciones:
– None (Ninguno): Se puede acceder a todas las
funciones del cortacéspedes robot.
– Low (Bajo):
– Anti-theft alarm (Alarma antirrobo): Si se levanta o
inclina la máquina durante más de 10 segundos, se
solicitará un código PIN. Si no se introduce el código
PIN en el lapso de un minuto, sonará una alarma y se
desactivará el funcionamiento automático.
– Connection lock (Bloqueo de conexión): Se deberá
introducir el código PIN para conectar el
cortacéspedes robot con la estación de carga.
– Reset lock (Bloqueo de reinicio): Se deberá introducir
el código PIN para restablecer los ajustes
predeterminados de fábrica en la máquina.
– Medium (Mediano):
– Todas las funciones del nivel bajo.
– Time lock (Bloqueo temporal): Se deberá introducir el
código PIN para cambiar un ajuste si no se ha
introducido ningún código PIN durante más de un
mes.
– High (Alto):
– Todas las funciones del nivel mediano.
Se eliminará el actual plan de corte y se iniciará de
nuevo el asistente de instalación.
Para ajustar un punto de partida, consulte
Realice un ensayo para comprobar si el cable está
tendido correctamente. Se puede ejecutar el paso
"Check installation" ("Controlar la instalación") con el
asistente de instalación,
Seleccione la frecuencia con la que se cortarán los
bordes.
Habilita o inhabilita las superficies contiguas.
Para activar el dispositivo inhabilitador en el menú
"Settings" ("Ajustes"), abra el submenú "Safety"
("Seguridad"), seleccione "Lock iMow" y confirme la
operación pulsando el botón OK (Aceptar).
Hay cuatro niveles de seguridad que pueden
seleccionarse. Según el nivel, se activarán distintos
bloqueos y dispositivos de seguridad.
Содержание RMI 422 P
Страница 2: ...Instruction Manual 1 86 Manual de instrucciones 87 179 ...
Страница 182: ...0478 131 3045 A 180 español EE UU 28 Direcciones ...
Страница 183: ......