![background image](http://html1.mh-extra.com/html/stihl/re-143/re-143_instruction-manual_1379150028.webp)
RE 143, RE 143 PLUS, RE 163, RE 163 PLUS
English
26
Troubleshooting
Before working on the machine, unplug the power cord, turn off the water supply and actuate the spray gun until the pressure has
been relieved.
Fault
Cause
Remedy
Motor does not run when switched on
(hums when switched on)
Mains voltage is too low or improper
Check electrical connection
Check plug, cable and switch
Extension cord with wrong cross-section
Use an extension cord with a sufficient
cross-section, see "Connecting the
machine to the power supply"
Extension cord is too long
Connect the machine without an exten
-
sion cord or with a shorter one
Mains circuit-breaker has been tripped
Switch off the machine, actuate the spray
gun until water only drips out of the head,
engage the safety catch, reset the mains
circuit-breaker
Spray gun not actuated
Actuate spray gun when switching on the
machine
Motor constantly switches on and off High-pressure pump or spray attachment is
leaky
Have the machine checked by a servicing
dealer
1)
Engine stops
Machine switches off because the motor is
overheating
Check whether the supply voltage and
machine voltage match; let the motor cool
down for at least 5 minutes
Weak, ragged, unclean jet
Nozzle fouled
Clean nozzle, see "Maintenance"
Pressure fluctuates or drops
Shortage of water
Open water tap completely
Comply with permissible suction lift (suc
-
tion mode only)
High-pressure nozzle in spray head is dirty
Clean high-pressure nozzle; see
"Maintenance"
Water intake strainer in pump inflow clogged Clean water intake strainer; see
"Maintenance"
High-pressure pump is leaky, valves are
defective
Have the machine checked by a servicing
dealer
1)
Nozzle clogged
Clean nozzle
Содержание RE 143
Страница 1: ... STIHL RE 143 163 Instruction Manual ...
Страница 2: ......
Страница 32: ...www stihl com 04586808321B 0458 680 8321 B 0458 680 8321 B AUS G ...