Stihl RE 120, Инструкция по эксплуатации, Страница: 22 / 28

Parameters dependent on pressure have been
measured at an inlet pressure of 0.3 MPa (3
bar).
19.2 Pressure washer STIHL RE
130 PLUS
Versions from 120 V to 127 V / 60 Hz
–
Fuse (characteristic "C" or "K"): 15 A
–
Power consumption: (EU) 2019/1781 §2(2) (j):
1.6 kW
–
protection class: I
–
Degree of of electrical protection: IPX5
–
Working pressure (p): 9.5 MPa (95 bar)
–
Max. permissible pressure (p max.): 14 MPa
(140 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max.): 7.3 l/min
(440 l/h)
–
Minimum water throughput (Q min.): 5.9 l/min
(355 l/h)
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 40 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 400 mm
–
Width: 408 mm
–
Maximum height: 925 mm
–
Minimum height: 717 mm
–
Length of high-pressure hose: 9 m
–
Weight (m) with accessory attached: 20.3 kg
Versions from 220 V to 240 V / 50 Hz
–
Fuse (characteristic "C" or "K"): 10 A
–
Power consumption: (EU) 2019/1781 §2(2) (j):
2.3 kW
–
Maximum permitted network impedance: 0.42
Ohm
–
protection class: I
–
Degree of of electrical protection: IPX5
–
Working pressure (p): 13.5 MPa (135 bar)
–
Max. permissible pressure (p max.): 17 MPa
(170 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max.): 8.3 l/min
(500 l/h)
–
Minimum water throughput (Q min.): 7.0 l/min
(420 l/h)
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 40 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 400 mm
–
Width: 408 mm
–
Maximum height: 925 mm
–
Minimum height: 717 mm
–
Length of high-pressure hose: 9 m
–
Weight (m) with accessory attached:
21.2 kg to 21.3 kg
Parameters dependent on pressure have been
measured at an inlet pressure of 0.3 MPa (3
bar).
19.3 Pressure washer STIHL RE
140 PLUS
Version 220 V - 230 V / 50 Hz
–
Fuse (characteristic "C" or "K"): 13 A
–
Power consumption: (EU) 2019/1781 §2(2) (j):
2.5 kW
–
Maximum permitted network impedance: 0.42
Ohm
–
protection class: I
–
Degree of of electrical protection: IPX5
–
Working pressure (p): 14.5 MPa (145 bar)
–
Max. permissible pressure (p max.): 18 MPa
(180 bar)
–
Max. water supply pressure (p in max.): 1 MPa
(10 bar)
–
Max. water throughput (Q max.): 8.5 l/min
(510 l/h)
–
Minimum water throughput (Q min.): 7.2 l/min
(430 l/h)
–
Max. suction lift: 0.5 m
–
Max. water temperature in pressure mode
(t in max): 40 °C
–
Max. water temperature in suction mode:
20 °C
sample inspection
–
Length: 400 mm
–
Width: 408 mm
–
Maximum height: 925 mm
–
Minimum height: 717 mm
–
Length of high-pressure hose: 10 m
–
Weight (m) with accessory attached: 22.7 kg
Parameters dependent on pressure have been
measured at an inlet pressure of 0.3 MPa (3
bar).
19.4 Extension Cords
If an extension cord is used, it must have a
ground wire and the wire gage of its conductors
must meet the following minimum requirements –
English 19 Specifications
22 0458-836-0121-A