20.6.1
Versions with manual fuel pump
135BA027 KN
► Press the manual fuel pump bulb at least five
times – even if the bulb is already filled with
fuel.
20.6.2
Versions with decompression valve
135BA015 KN
► Press in the button to open the decompression
valve.
The decompression valve closes as soon as the
engine fires.
► For this reason you must press in the button
before each starting attempt.
20.6.3
All models
2
1
208BA000 KN
0
3
► Push the hand guard (1) forward – the chain is
locked.
► Press down the trigger lockout (2) and pull the
throttle trigger at the same time. Set Master
Control lever (3) to:
Choke shutter closed (
l
)
–
If the engine is cold (also use this position if
the engine stopped when you opened the
throttle after starting)
Starting throttle position (
n
)
–
If the engine is warm, i.e. if it has been running
for about one minute.
► Hold and start your saw as described.
20.7
When engine begins to fire
► Set the Master Control lever to the starting
throttle position (
n
).
► Hold and start your saw as described.
English
20 Starting / Stopping the Engine
30
0458-208-0121-C
