![background image](http://html1.mh-extra.com/html/stihl/ms-193-t/ms-193-t_instruction-manual_1378747011.webp)
MS 193 T
English
9
Kickback occurs, e.g.
–
when the upper quadrant of the bar
nose unintentionally contacts wood
or another solid object, e.g. when
another limb is touched accidentally
during limbing.
–
when the chain at the nose of the
guide bar is pinched in the cut.
QuickStop chain brake:
This device reduces the risk of injury in
certain situations – it cannot prevent
kickback. If activated, the brake stops
the saw chain within a fraction of a
second –
for a description of this device refer to
chapter on "Chain Brake" in this manual.
To reduce the risk of kickback
–
Work cautiously and avoid
situations which could cause
kickback.
–
Hold the saw firmly with both hands
and maintain a secure grip.
–
Always cut at full throttle.
–
Be aware of the location of the guide
bar nose at all times.
–
Do not cut with the bar nose.
–
Take special care with small, tough
limbs, they may catch the chain.
–
Never cut several limbs at once.
–
Do not overreach.
–
Never cut above shoulder height.
–
Use extreme caution when re-
entering a previous cut.
–
Do not attempt plunge cuts if you
are not experienced in this cutting
technique.
–
Be alert for shifting of the log or
other forces that may cause the cut
to close and pinch the chain.
–
Always cut with a correctly
sharpened, properly tensioned
chain – the depth gauge setting
must not be too large.
–
Use a low kickback chain and a
narrow radius guide bar.
Pull-in (A)
Pull-in occurs when the chain on the
bottom of the bar is suddenly pinched,
caught or encounters a foreign object in
the wood. The reaction of the chain pulls
the saw forward – to reduce this risk,
always engage the spiked bumper
securely in the tree or limb.
Pushback (B)
Pushback occurs when the chain on the
top of the bar is suddenly pinched,
caught or encounters a foreign object in
the wood. The reaction of the chain
drives the saw straight back toward the
operator – to avoid this risk:
–
Be alert to situations that may cause
the top of the guide bar to be
pinched
–
Do not twist the guide bar in the cut.
001BA257 KN
001BA037 KN
A
001BA038 KN
B
Содержание MS 193 T
