12
English
MF-MM
Mounting the MultiTool
Left-hand and right-hand
dethatchers are different.
The direction of rotation is marked
with arrows on the gearbox and
flange. Make sure both arrows point
in the same direction. The spring
tines may be damaged or broken if
the direction of rotation is wrong.
:
Rotate the left-hand dethatcher (
4
)
on the shaft until it can be pushed
into position. Check arrows showing
direction of rotation.
:
Insert hitch pin (
5
) in hole in shaft
and snap it into position.
:
Mount the right-hand dethatcher in
the same way.
Mounting and Removing the
Deflector Extensions
:
Slide both deflector extensions onto
the right and left sides of the
deflector, push them fully home at
the top and bottom and engage the
tab (
1
).
To remove the extensions:
:
Use the combination wrench to
disengage the tab (
1
) and pull the
extensions away.
The deflector extensions divert
removed material and debris away
from the machine and operator.
Never work without properly fitted
deflector extensions.
Installing and Removing the Skirt
:
Secure the skirt (
1
) with screw (
2
)
and rotary knob (
3
) to the right-hand
side of the flange.
:
Adjust the skirt to the required depth
so that it overlaps the deflector.
:
Tighten the rotary knob firmly.
The skirt diverts removed material
and debris away from the machine
and the operator.
Never work without a properly
mounted skirt.
4
483BA004 KN
5
1
1
483BA007 KN
3
483BA01
1 KN
2
