manualshive.com logo in svg

Stihl KW 85, Инструкция по эксплуатации

Поделиться
Скачать
Stihl KW 85 Скачать руководство пользователя страница 2

1

KW 85

STIHl

english / USA

© 2001 Andreas Stihl AG & Co., Waiblingen

0458 223 3021. M

0,25

. C1. PM. Printed in USA

Contents

Guide to Using this Manual  ..............  2
Safety Precautions and Working 
Techniques .......................................  3
Fitting Carrying Eye* (Clamp)  ........  10
Mounting the Loop Handle  .............  10
Installing the Gearbox  ..................... 11
Mounting Sweeper Drums ..............  12
Fuel ................................................  13
Fueling ...........................................  14
Attaching Machine to Harness* ......  14
Starting ...........................................  15
Operating Instructions  ....................  18
Using the PowerSweep ..................  18
Disconnecting Machine from 
Harness ..........................................  19
Cleaning the Air Filter .....................  20
Motor Management  ........................  21
Adjusting the Carburetor  ................  21
Adjusting the Carburetor  ................  22
Checking the Spark Plug ................  24
Removing the Gearbox  ..................  25
Replacing the 
Rubber Sleeve  ...............................  25
Replacing Sweeper Drum  ..............  26
Replacing the Starter Rope and 
Rewind Spring ................................  26
Spark Arresting Screen in Muffler  ..  29
Engine Running Behavior  ..............  30
Storing the Machine  .......................  30
Maintenance Chart .........................  31
Parts and Controls  .........................  32
Specifications .................................  34
Special Accessories  .......................  35
Maintenance and Repairs  ..............  35
STIHL Incorporated Federal and 
California Emission Control 
Warranty Statement ........................  36
Quality Certification  ........................  38

Allow only persons who understand this 
Manual to operate your PowerSweep.
To receive maximum performance and 
satisfaction from your STIHL 
PowerSweep, it is important that you 
read and understand the maintenance 
and safety precautions, starting on 
page 3, before using your PowerSweep. 

Contact your STIHL dealer or the STIHL 
distributor for your area if you do not 
understand any of the instructions in this 
Manual.

!

Warning!

Because a PowerSweep is a power  
tool, some special safety precautions 
must be observed to reduce the risk of 
personal injury.

Careless or improper use may cause 
serious or even fatal injury. 

Always wear proper eye protection.

STIHL's philosophy is to continually 
improve all of its products. As a result, 
engineering changes and improvements 
are made from time to time. If the 
operating characteristics or the 
appearance of your PowerSweep differs 
from those described in this Manual, 
please contact your STIHL dealer for 
information and assistance.

Printed on chlorine-free paper

Printing inks contain vegetable oils, 
paper is recyclable

Содержание KW 85










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды