manualshive.com logo in svg
background image

KM 55 R, KM 55 RC

English

14

N

Set the choke lever (8) to

N

Press the fuel pump bulb (9) at least 
five times – even if the bulb is 
already filled with fuel.

Starting

N

Place the unit on the ground: Check 
that the working tool is not touching 
the ground or any other obstacles – 
see also "Starting / Stopping the 
Engine" in the KombiTool 
instruction manual.

N

Make sure you have a safe and 
secure footing.

N

Hold the unit with your left hand and 
press it down 

firmly

 – your thumb 

should be under the fan housing.

N

Hold the starter grip with your right 
hand.

Version without Easy2Start

N

Pull the starter grip slowly until you 
feel it engage and then give it a brisk 
strong pull.

Version with Easy2Start

N

Pull the starter grip slowly until you 
feel it engage and then pull it out 
slowly and steadily.

g

if the engine is cold

e

for warm start – also use this posi-
tion if the engine has been running 
but is still cold.

9

8

232BA011 KN

Do not stand or kneel on the drive 
tube.

232BA012 KN

233BA014 KN

Do not pull out the starter rope all 
the way – 

it might otherwise 

break

.

Do not pull out the starter rope all 
the way – 

it might otherwise 

break

.

232BA014 KN

Содержание KM 55 R





















Отзывы: