Stihl HSA 94 R, Инструкция по эксплуатации

Страница: 36 / 100

Applied conformity assessment procedure in
accordance with UK regulations Noise Emission
in the Environment by Equipment for use Out‐
doors Regulations 2001, Schedule 8.
HSA 94 R, cutting length 600 mm
–
Measured sound power level: 94 dB(A)
–
Guaranteed sound power level: 96 dB(A)
HSA 94 R, cutting length 750 mm
–
Measured sound power level: 95 dB(A)
–
Guaranteed sound power level: 97 dB(A)
HSA 94 T, cutting length 600 mm
–
Measured sound power level: 95 dB(A)
–
Guaranteed sound power level: 97 dB(A)
HSA 94 T, cutting length 750 mm
–
Measured sound power level: 96 dB(A)
–
Guaranteed sound power level: 98 dB(A)
The technical documents are stored at
ANDREAS STIHL AG & Co. KG.
The year of manufacture, country of manufacture
and serial number are applied to the pruning
shears.
Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann, Director Product Certifica‐
tion & Regulatory Affairs
23 General Power Tool Safety
Warnings
23.1 Introduction
This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the
IEC 62841 standard for hand-held motor-oper‐
ated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding
an electric shock given under “Electrical Safety”
do not apply to STIHL cordless products.
WARNING
■ Read all safety warnings, instructions, illustra‐
tions and specifications provided with this
power tool. Failure to follow all instructions lis‐
ted below may result in electric shock, fire
and/or serious injury. Save all warnings and
instructions for future reference.
The term "electric power tool" in the safety warn‐
ings refers to mains-operated (corded) power
tools or battery-operated (cordless) power tools.
23.2 Work area safety
a
)
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b
)
Do not operate power tools in explosive
atmospheres, such as in the presence of flam‐
mable liquids, gases or dust. Power tools cre‐
ate sparks which may ignite the dust or fumes.
c
)
Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
23.3 Electrical safety
a
)
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.Unmodified plugs and matching outlets
will reduce risk of electric shock.
b
)
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or groun‐
ded.
c
)
Do not expose power tools to rain or wet con‐
ditions. Water entering a power tool will
increase the risk of electric shock.
d
)
Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
e
)
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the
risk of electric shock.
f
)
If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
23.4 Personal safety
a
)
Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the influence of drugs, alcohol or medi‐
cation. A moment of inattention while operat‐
ing power tools may result in serious personal
injury.
English 23 General Power Tool Safety Warnings
36 0458-005-9621-B