HSA 65
English
4
–
Do not operate on an easily
combustible surface (e.g. paper,
texiles) or in an easily combustible
environment –
risk of fire
.
–
Do not operate in a hazardous
location, i.e. in a location where
there are combustible liquids
(fumes), vapors or dusts. Chargers
can produce sparks, which may
ignite the dust or vapors –
risk of
explosion
.
–
Never jerk the connecting cord to
disconnect it from the wall outlet. To
unplug, grasp the plug, not the cord.
Have a damaged connecting cord
repaired by an experienced
electrician.
–
Do not use the connecting cord for
any other purpose, e.g. for carrying
or hanging up the charger.
–
Never use connecting cords that do
not comply with regulations.
–
To reduce the risk of stumbling,
position and mark the connecting
cord so that it cannot be damaged
or endanger others.
To reduce the risk of electric shock:
–
Always connect the unit to a
properly installed wall outlet.
–
Make sure the insulation of the
connecting cord and plug is in good
condition.
After using the charger, unplug it from
the wall socket.
Clothing and Equipment
Wear proper protective clothing and
equipment.
Avoid clothing that could get caught on
branches or brush or moving parts of the
machine. Do not wear a scarf, necktie or
jewelry. Tie up and confine long hair
(e.g. with a hair net, cap, hard hat, etc.).
STIHL offers a comprehensive range of
personal protective clothing and
equipment.
Transporting the Unit
Always switch off the power tool, move
the retaining latch to
ƒ
, remove the
battery and fit the blade scabbard – even
when you carry the unit for short
distances.
Carry the power tool by the handle –
cutting blades behind you.
Transporting in a vehicle: Properly
secure the power tool to prevent
turnover and damage.
Before Starting Work
Check that your power tool is properly
assembled and in good condition – refer
to appropriate chapters in the instruction
manual.
Check the charger's con-
necting cord regularly for
damage. If the connect-
ing cord is damaged,
immediately disconnect
the plug from the wall
outlet to avoid the
risk of
electric shock.
Clothing must be sturdy
but allow complete free-
dom of movement. Wear
snug-fitting clothing, an
overall and jacket combi-
nation, do not wear a
work coat.
Wear sturdy shoes with
non-slip soles.
Wear safety glasses.
Wear heavy-duty gloves.
Remove the battery from
the power tool. This
avoids the risk of the
motor starting
unintentionally.
3901BA023 KN
All manuals and user guides at all-guides.com
all-guides.com
