4
991
1BA008 KN
3
► Push the gearbox (3) into position and tighten
down the clamp screws (4).
481BA01
1 KN
► Tighten the two clamp screws on the gearbox
in the following sequence:
–
Tighten the first screw moderately.
–
Tighten the second screw moderately.
–
Tighten down first screw firmly.
–
Tighten down second screw firmly.
7
Mounting the Deflector
7.1
Mount the wheel guard.
2 3
1
991
1BA007 KN
► Attach the wheel guard to the gearbox, while
doing so, insert the nose (1) into the recess (2)
on the wheel guard.
► Turn-in and tighten the screw (3).
8
Mounting the Cutting
Attachment
8.1
Placing Power Tool on the
Ground
991
1BA009 KN
► Shut off the engine.
► Turn the power tool so that the cutting attach‐
ment mounting face is pointing up.
8.2
Blocking the shaft
2
3
1
002BA569 KN
2
To mount and remove the cutting attachments,
the shaft (1) must be blocked with the locking
pin (2) or Allen wrench (2). The parts are inclu‐
ded in the scope of delivery and are available as
special accessories.
► Push the locking pin (2) or Allen wrench (2) as
far as it will go into the hole (3) in the gear –
press gently
► Turn the shaft, nut or cutting attachment until
the locking pin engages and the shaft is
blocked
8.3
Fitting the mowing head with
screw mounting
Keep the supplement sheet for the mowing head
in a safe place.
7 Mounting the Deflector
English
0458-480-0121-B
9
Содержание FS-MM
Страница 1: ...FS MM 2 13 Instruction Manual...
Страница 14: ...English 16 Disposal 14 0458 480 0121 B...
Страница 15: ...16 Disposal English 0458 480 0121 B 15...
Страница 16: ...www stihl com 04584800121B 04584800121B 0458 480 0121 B 0458 480 0121 B...