Stihl FS 410 C-M, Инструкция по эксплуатации

Страница: 32 / 88

FS 410 C-M, FS 460 C-M
English
30
If the machine is to remain out of use for
approx. 3 months or more
N
Drain and clean the fuel tank in a
well ventilated place
N
Dispose of fuel in accordance with
the regulations and having regard
for the environment
N
Run the engine until the carburetor
is dry. This helps to prevent the
carburetor diaphragms sticking
together.
N
Remove, clean and inspect the
cutting attachment. Treat metal
cutting attachments with protective
oil.
N
Thoroughly clean the machine
N
Store the machine in a dry and safe
place, out of the reach of children
and other unauthorized users
N
Use a sharpening file (special
accessory) to sharpen dull cutting
attachments. In case of more
serious wear or nicks: Resharpen
with a grinder or have the work done
by a dealer – STIHL recommends a
STIHL servicing dealer.
N
Resharpen frequently, take away as
little material as possible: two or
three strokes of the file are usually
enough.
N
Resharpen the cutters (1) uniformly
– do not alter the contour of the
parent blade (2) in any way.
See cutting attachment packaging for
additional sharpening instructions.
Balancing
N
After resharpening about 5 times,
check the cutting attachment for
out-of-balance on a STIHL balancer
(special accessory) or have it
checked by a dealer and re-
balanced as necessary – STIHL
recommends a STIHL servicing
dealer.
Clamped Area of Handlebar
N
Check the freedom of movement of
the handlebar (1) in the clamp
moldings (2) at regular intervals.
Handlebar is difficult to move
N
Loosen the wing screw (3) just
enough for the handlebar to be
moved.
N
Push the handlebar (1) sideways
out of the clamp.
N
Soak a cloth in a clean, non-
flammable cleaning solution – do
not use a cleaning agent containing
oil or grease.
Storing the Machine Sharpening Metal Cutting
Blades
002BA358 KN
2
2
1 1
Inspection and Maintenance
by User
1
2
6BA021 KN
3
6BA022 KN
1