Stihl FR 460 TC-M Скачать руководство пользователя страница 32

Страница: 32 / 48

FR 460 TC-M

English

Remove the filter cover (2).

Clean away loose dirt from around

the filter (3) and inside the filter

cover.

The air filter (3) is a pleated paper filter

element.

Remove and check the filter

element (3) – replace if paper or

frame is dirty or damaged.

Unpack the new filter.

NOTICE

Do not bend or twist the filter before

installation as it might otherwise be

damaged – do not use damaged filters.

Fit the filter in the filter housing.

Fit the filter cover.

Use only high quality air filters to ensure

the engine is protected from abrasive

dust.
STIHL recommends you use only

original STIHL air filters. The high quality

standard of these parts guarantees

trouble-free operation, a long engine life

and very long filter service lives.

Filter Element for Winter Operation

Maintenance and care of the special

filter element for winter operation are

described in the chapter on "Winter

Operation".

General Information

The M-Tronic controls fuel feed and

ignition timing electronically in all

operating conditions.
M

Tronic guarantees simple and fast

starts. The engine is started in the

Start

}

position irrespective of climatic

conditions or engine temperature. After

starting, the Start

}

position can be

maintained until the engine runs

smoothly.
M-Tronic ensures optimum engine

power at all times, very good

acceleration and automatic adjustment

to suit changing conditions.
For this reason there is no need to

change the carburetor setting – the

carburetor has no adjusting screws.
If the usual good running behavior and

engine power are not reached after an

extreme change in operating conditions,

contact your servicing dealer for

assistance.
STIHL recommends that you have

servicing and repair work carried out

exclusively by an authorized STIHL

servicing dealer.

0812BA032 KN

M-Tronic

Содержание FR 460 TC-M

















































Результаты поиска

Содержание FR 460 TC-M

Отзывы:

Похожие инструкции для FR 460 TC-M

Бренды по названию

Популярные бренды

Stihl FR 460 TC-M, Инструкция по эксплуатации

Результаты поиска

Содержание FR 460 TC-M

Отзывы:

Похожие инструкции для FR 460 TC-M

Бренды по названию

Популярные бренды