10
English
FC-MM
Edging
:
Start the engine.
:
Start the cut at no less than half
throttle and continue cutting at full
throttle.
:
Hold and guide your edger so that
the blade is vertical.
:
Cut steadily so that the engine is not
lugged down – do not use excessive
feed force.
:
Cut at a normal walking pace.
:
Always walk forwards when cutting,
do not pull the unit towards you.
:
Cut at a steady pace to avoid having
to make several passes.
1 =
Alignment sight for edger blade
Cleaning the cutting blade
Pieces of grass or roots may become
tightly wound around the tool mounting
during edging work.
Clean the blade as follows:
–
Shut off the engine.
–
Wear protective gloves.
–
Pull the spring clip out of the shaft.
–
Pull the blade off the shaft.
–
Clean residue of roots, plants and
soil off the blade and mounting.
Refit the blade as described in chapter
"Mounting the MultiTool".
90°
481BA005 KN
481BA006 KN
1
