Stihl BR 420, Инструкция по эксплуатации

Страница: 6 / 34

5 BR 420
English
Before Starting
Check that your power tool is properly
assembled and in good condition – refer
to appropriate chapters in the instruction
manual:
– Throttle trigger must move freely
and spring back to idle position
when released.
– Setting lever must move easily to
STOP or 0 .
– Check that spark plug boot is secure
– a loose boot may cause arcing
that could ignite combustible fumes
and cause a fire.
– Never attempt to modify the controls
or safety devices.
To avoid the risk of accidents and
personal injury, do not operate your unit
if it is not in a safe operating condition.
Be prepared for an emergency:
Practise quickly opening the fastener on
the waist belt, loosening the shoulder
straps and setting down the unit.
Starting the Engine
Start the engine at least 3 meters from
the fueling spot, outdoors only – not in
confined spaces.
Your power tool is a one-person unit. Do
not allow other persons to be near the
running unit – even when starting.
Do not drop start the engine. The correct
starting procedure is described in your
instruction manual.
Place the unit on firm ground or other
solid surface in an open area. Make sure
you have good balance and secure
footing. Hold the unit securely.
Note: As soon as the engine starts, the
air flow may throw small objects (e.g.
stones) in your direction.
Holding and Controlling the Unit
The unit is carried as a backpack. Hold
and guide the blower tube with your right
hand on the control handle.
Work at a slow walking pace, forwards
only – make sure you have a good view
of the nozzle outlet at all times. To
reduce the risk of tripping or stumbling,
do not walk backwards.
Always shut off the engine before taking
the unit off your back.