Stihl BGA 56, Инструкция по эксплуатации

Страница: 23 / 64

0458-712-8221-A
21
English 17 During Operation
► Depress the trigger switch lockout and the trigger switch
momentarily.
► Release the retaining latch, trigger switch lockout and
trigger switch.
The retaining latch, trigger switch lockout and trigger
switch should return to their respective locked positions. If
they do not, take the blower to an authorized STIHL
servicing dealer to be repaired before use.
If you are able to activate the trigger switch without first
unlocking the retaining latch and depressing the trigger
switch lockout, take the blower to an authorized STIHL
servicing dealer to be repaired before use.
► Insert the battery.
► Hold the blower firmly and unlock the retaining latch.
Depress the trigger switch lockout and trigger switch
momentarily.
The blower should switch on. If it does not, take the blower
to an authorized STIHL servicing dealer to be repaired
before use.
► Release the trigger switch.
The blower should switch off.
If the blower does not switch off after you release the
trigger switch, remove the battery and take the blower to
an authorized STIHL servicing dealer to be repaired
before use.
17.1 Using the Blower
WARNING
To reduce the risk of personal injury, never work with the
blower in the rain or in wet or damp conditions,
@
5.5.
Always wear proper clothing and protective apparel,
including proper eye protection,
@
5.4. Never direct the air
flow toward bystanders. Keep bystanders at least 16 ft.
(5 m) away from the work area,
@
5.6.4. Work carefully and
maintain proper control of the blower.
The blower is designed for single-handed operation with
either the right or left hand.
► Hold the unit firmly with your hand, keeping the handle
cradled between your thumb and fingers.
► Direct the air flow at the edges of the pile of material to be
blown.
NOTICE
Never direct the air flow toward objects such as vehicles or
windows that are less than 16 ft. (5 m) away.
Observe all applicable laws, regulations, standards and
ordinances.
18.1 Preparing for Transportation or Storage
WARNING
To reduce the risk of personal injury from unintended
activation or unauthorized use, switch off the motor and
remove the battery before transporting the blower or putting
it down.
To prepare the blower for transportation or storage:
► Switch off the blower,
@
15.2.
► Remove the battery,
@
14.2.
► If the battery or blower became wet during operation,
allow them to dry separately and completely before
charging or storing.
17 During Operation
18 After Finishing Work
0000-GXX-0620-A0