Stihl ASA 85, Инструкция по эксплуатации

Страница: 15 / 224

0458-285-9721-C
13
English 8 Adjusting the Pruning Shears
► Press the control lever (2) downwards as often as
necessary until the display (1) shows the current blade
opening.
► Press the control lever (2) downwards as often as
necessary until the required blade opening is shown.
8.2 Activating and Deactivating the Standby Mode
If the standby mode is activated, the cutting blade may be
permanently closed even though the pruning shears are
switched on. The standby mode can be deactivated.
► Switch on the pruning shears.
► Press the control lever (2) downwards as often as
necessary until the display (1) shows ‘CLICK-CLICK ON’
or ‘CLICK-CLICK OFF’.
The standby mode is activated If the display (1) shows
‘CLICK-CLICK ON’.
The standby mode is deactivated if the display (1) shows
‘CLICK-CLICK OFF’.
► Depress the control lever (2) as often as necessary until
the standby mode is activated or deactivated.
8.3 Adjusting Closing Action of Cutting Blade
When the pruning shears are switched on, the cutting blade
closes proportionally to the movement of the trigger.
The closing action of the cutting blade can be adjusted so
that it always closes completely when the trigger is
depressed.
► Switch on the pruning shears.
► Press the control lever (2) downwards as often as
necessary until the display (1) shows ‘REG ON’ or ‘REG
OFF’.
If the display (1) shows ‘REG ON’, the cutting blade closes
proportionally to the movement of the trigger.
If the display (1) shows ‘REG OFF’, the cutting blade always
closes completely when the trigger is depressed.
► Depress the control lever (2) as often as necessary until
the required function is selected.
When the pruning shears are switched off and then on
again, the cutting blade then closes proportionally to the
movement of the trigger.
2
1
1/2
50%
ON
1/2 60% ON
1/2 70% ON
1/2 OFF
0000-GXX-4074-A0
2
1
CLICK-CLICK ON
CLICK-CLICK OFF
0000-GXX-4075-A0
2
1
REG ON
REG OFF
0000-GXX-4076-A0