STIHL 019 T
34
7.
AV HANDLE SYSTEM
Rubber anti-vibration buffers are
installed between the engine housing
and handle frame. Damaged rubber
buffers (annular buffers) must always
be replaced.
Annular buffers in fan housing
- Remove the fan housing
• Pry plug (with key) out of annular
buffer.
• Pry plug (without key) out of
annular buffer.
• Place handlebar in position, apply
a little oil to the front end of the
annular buffer and push it home
until its groove (1) engages the rib
(2).
• Push the small end of the annular
buffer (oil it first) into the handlebar
until its groove (1) engages the rib
(2).
- Push home the plug (without key).
• Push the rubber buffer out of the fan
housing.
• Rotate plug (with key) approx. 90
degrees.
• Rotate plug (with key) approx. 90
degrees and take it out of the
annular buffer.
• Push the annular buffer out of the
handlebar.
