STIHL 019 T
39
9.2
Oil Tank/Suction Hose
9.
CHAIN LUBRICATION
9.1
Pickup Body
Impurities gradually clog the fine
pores of the filter with minute particles
of dirt. This prevents the oil pump
from supplying sufficient oil to the bar
and chain. In the event of problems
with the oil supply system, first check
the oil tank and the pickup body.
Clean the oil tank if necessary.
Troubleshooting chart - see "General
Servicing, Troubleshooting"
handbook.
• Pull the pickup body out of the oil
suction hose.
- Wash the pickup body in white spirit
and, if possible, blow out with
compressed air.
- Always replace a damaged pickup
body.
- Flush out the oil tank.
Assembly is a reversal of the
disassembly sequence.
- Remove the engine - see 4.1.
• Pull out the oil tank and push the
suction hose out of its seat at the
same time.
• Pull suction hose with pickup
body out of the oil tank.
• Pull the pickup body out of the
suction hose.
- Inspect the pickup body and clean
or replace it as necessary.
• Use assembly hook (1)
5910 893 8800 to withdraw the pickup
body from the oil tank.
Note:
Avoid stretching the oil hose.
• Unscrew oil filler cap and drain the
oil tank.
Note:
Collect chain oil in a clean
container or dispose of it properly at
an approved disposal site.
