EN - 11
REQUIRED TOOLS
• Adjustable wrench
• Petroleum jelly or dielectric grease
UNPACK UNIT
1. Disengage transmission. See
2. Move unit from container to a level
surface.
3. Remove all other pieces from shipping
container.
4. Cut all packaging cable ties on unit and
discard.
5. Remove packaging material from unit and
discard.
SECURE SEAT CABLE
1. Remove nut and one end of seat cable.
Reinstall nut to secure remaining cable
end to seat plate. See Figure 2.
See Figure 3.
2. Remove nut from bolt on battery tray.
Retain nut.
3. Tilt seat up slightly so cable end reaches
bolt on battery tray.
4. Install cable end onto bolt on battery tray
and secure with nut removed in step 2.
SECURE OPERATOR PRESENCE
CABLE
See Figure 4.
1. Insert cable clip into top hole on battery
tray.
2. Tip seat to upright position.
ASSEMBLY
Figure 2
Figure 3
Figure 4
