WORKSHOP MANUAL
T...102/122 - TC...102/122
Map of functional units
1. Motore e Serbatoio
Problem
Probable cause
Solution
Starter motor does not
run
Low battery
Recharge
No starter relay contact
Check
Faulty connector and/or starter
motor failure
Check and/or replace
[*]
The starter motor runs
but the engine does not
start
Blown spark plug electrode
Replace the spark plugs
[*]
Uncertain connections
Check the connectors
–
Coil failure
Check and/or replace
[*]
The carburettor solenoid valve
does not open
Check
No fuel is pumped to the
carburettor
Check the filter, fuel pump (if applicable)
and the carburettor
[*]
The engine runs irregu-
larly and/or lacks power
Dense and/or blue ex-
haust fumes
Faulty ignition
Check the spark plugs and ignition
system
[*]
Low fuel level in the tank
Top up
–
Dirty or old fuel
Empty the fuel tank and add fresh fuel
–
Clogged carburettor filter
Check and clean
[*]
Black exhaust fumes
Excessively oily carburetion
Check the starter and command cable
[*]
Engine overheating
Spark plugs with inadequate
heat rating
Check
[*]
Carburetion problems
Check the carburettor
[*]
Insufficient oil level
Check and top up
[*]
Clogged suction system
Check and clean the air filter and the
suction pipe
[*]
Dirty cooling flaps
Clean
[*]
Broken cooling fan
Replace
[*]
Engine idling speed is
too high or too low.
Incorrect cable adjustment
Adjust
Abnormal noise and
vibrations
Loose bolts and screws
Check and tighten to the prescribed
values
[*]
Check the engine Manufacturer’s Manual
Validity
General informations
This chapter helps achieve a rapid identification
and solution to the most recurrent problems, clas
sified according to the operating unit in question.
Related topics
---
CHAPTER
REVISION
FROM ...
PAGE
3.2
0
2018
1 of 3
TROUBLESHOOTING AND REMEDIES