Stiga stig, Инструкция по эксплуатации

Страница: 46 / 65

46 EN
4. OPERATION
4.3.4. SCHEDULED PROGRAM / SINGLE WORK CYCLE SELECTION - SCHEDULED PROGRAM
BUTTON
The " SCHEDULED PROGRAM " button (F) allows to activate or deactivate the work schedule set through
the App.
• If the button (F) is illuminated in green, the robot lawn mower works according to the scheduled
work program (also see Par. 3.7.7, see Par. 3.7.8 for programming).
• If the button (F) is off, the robot lawn mower works by performing a single work cycle and then
returns to the charging base (also see Par. 3.7.7).
Procedure:
1. Press the button “ STOP ” (A) to open the cover (B) and access the control console (C).
2. It’s possible to switch from the scheduled work to single work cycle by pressing the “ SCHEDULED
PROGRAM ” button (F).
3. To start the robot lawn mower, proceed as follows depending on the case:
• If the scheduled program is active, perform one of the following actions:
- Robot lawn mower inside the charging base:
- close the cover (B), the robot will follow the scheduled program;
- Press the " START " button (M) to set the robot in working mode, the button lights up. If the
robot lawn mower is not within the scheduled working time, it will perform a work cycle,
return to base and resume operation as per the scheduled program.
- Robot lawn mower outside the charging base:
- Press the " RETURN TO BASE" button (G) to send the robot to the charging base, the
button lights up;
- Press the " START " button (M) to set the robot in working mode, the button lights up. If the
robot lawn mower is not within the scheduled working time, it will perform a work cycle,
return to base and resume operation as per the scheduled program.
• If the scheduled program is not active, follow one of the following actions:
- Press the "RETURN TO BASE" button (G) to send the robot to the charging base, the button
lights up;
- Press the "START" button (M) to set the robot in working mode, the button lights up.
4. Close the cover (B).
B
C A
F G M