Stiga PARK FARMER, Руководство пользователя, Страница: 8 / 17

48
ENGLISH
EN
3 GENERAL
You must read these instructions for use
and the accompanying pamphlet
“SAFETY INSTRUCTIONS” careful-
ly, before starting up the machine.
3.1 Symbols
The following symbols can be found on the ma-
chine to remind you of the care and attention that
are required during use.
The symbols mean:
Warning!
Read the instruction manual and the safety
manual before using the machine.
Warning!
Watch out for discarded objects. Keep on-
lookers away.
Warning!
Always use hearing protectors.
Warning!
This machine is not designed to be driven
on public roads.
Warning!
The machine, equipped with original ac-
cessories, must not be driven in any direc-
tion on slopes with a gradient greater than
10º.
Warning!
Risk of crushing injuries. Keep hands and
feet well away from the articulated steer-
ing joint.
Warning!
Risk of burn injuries.
4 DESCRIPTION
4.1 Steering
The machine is articulated. This means that the
chassis is divided into a front and a rear section,
which can be turned in relation to each other.
The articulated steering means that the machine
can turn around trees and other obstacles with an
extremely small turning radius.
4.2 Safety system
The machine is equipped with an electrical safety
system. The safety system interrupts certain activ-
ities that can entail a danger of incorrect manoeu-
vres. For example, the engine cannot be started if
the clutch-parking brake pedal is depressed.
The operation of the safety system must
always be checked every time before
use.
4.3 Controls
See fig. 10-12.
4.3.1 Implement lifter, mechanical (10:C)
To switch between working position and transport
position:
1. Depress the pedal fully.
2. Release the pedal slowly.
4.3.2 Clutch-parking brake (10:B)
Never press the pedal while driving.
There is a risk of overheating in the
power transmission.
The pedal (10:B) has the follow-
ing three positions:
• Released . The clutch is not activated. The park-
ing brake is not activated.
• Depressed halfway . Forward drive disengaged.
The parking brake is not activated.
• Pressed down . Forward drive disengaged. The
parking brake is fully activated but not locked.
4.3.3 Inhibitor, parking brake (10:A)
The inhibitor locks the “clutch-brake”
pedal in the depressed position. This func-
tion is used to lock the machine on slopes,
during transport, etc., when the engine is
not running.