Stiga 2259976, Руководство оператора

Страница: 116 / 402

EN - 12
• Stop the motor.
• Remove the battery from its compartment.
• Cool the snow thrower.
• Always clean the machine after use with a damp
cloth dipped in neutral detergent.
• Remove all traces of humidity using a soft damp
cloth. Humidity can generate risks of electric
shocks.
• Do not use aggressive detergents or solvents to
clean the plastic parts or hand grips.
• Do not spray water onto the motor and electrical
components and prevent them from getting wet.
• To avoid overheating and damage to the motor
or the battery, always keep the cooling air vents
clean and free of debris.
8.4 NUTS AND BOLTS
• Keep all nuts, bolts and screws tight to be sure
the equipment is in safe working condition.
• Check regularly that the handles are fixed firmly.
9. STORAGE
9.1 STORING THE MACHINE
When the machine is to be stored away:
1. Remove the battery from its housing
and recharge it (par. 8.2.2).
2. Wait until the motor is sufficiently cold;
3. Clean (par. 8.3).
4. Check there are no loose or damaged
components. If necessary, replace the
damaged components and tighten
any screws and loose bolts or contact
the authorised service centre.
5. Store the machine:
– in a dry place;
– protected from inclement weather;
– in a place where children cannot get to it;
– making sure that keys or tools used
for maintenance are removed.
9.2 STORING THE BATTERY
The battery must be stored in places with
temperatures b7°C and + 40°C.
If the machine is stored in places that could
exceed these threshold, it is recommended to
remove the battery and store it in a more suitable
location.
NOTE If unused for any length of time,
recharge the battery every two months to prolong
its working life.
10. HANDLING AND TRANSPORTATION
Whenever the machine is to be handled or
transported you must:
– Stop the machine.
– Wear heavy work gloves.
– Make sure that all moving parts have come to
a complete stop.
– Remove the battery from its seat.
– Only hold the machine by the handles
– Make sure that machine movements do not
cause damage or injuries.
11. ASSISTANCE AND REPAIRS
This manual provides all the necessary
information to run the machine and for correct
basic maintenance operations which can be
performed by the user. Any regulations and
maintenance operations not described herein
must be carried out by your Dealer or Authorised
Service Centre, which have the necessary
knowledge and equipment to ensure that the
work is carried out correctly, maintaining the
correct degree of safety and the original operating
conditions of the machine.
Any operations performed in unauthorized centres
or by unqualified persons will void all warranties,
obligations and liabilities of the Manufacturer.
• Non-genuine spare parts and attachments are
not approved. Use of non-genuine spare parts
and attachments cause the warranty to expire.
• Genuine spare parts are supplied by
authorised assistance workshops and dealers.
12. WARRANTY COVERAGE
The warranty conditions are intended for consum-
ers only, i.e. non-professional operators.
The warranty covers all material quality and man-
ufacturing defects recognised during the warranty
period by your Dealer or Authorised Service Centre.
The warranty is re-
stricted to the repair or
replacement of com-
ponents recognised as
faulty.
The warranty only ap-
plies to machines sub-
jected to regular mainte-
nance.
The warranty does not
cover damages resulting
from:
• Failure to become
familiar with the doc-
umentation accom-
panying the machine
(Instruction manuals).
• Professional use.
• Carelessness, negli-
gence.
• External causes
(lightning, impact,
presence of foreign
bodies inside the ma-
chine) or incidents.
• Incorrect use or as-
sembly or prohibited
by the manufacturer.