INSTRUCTION MANUAL
GB
–
5/5
www.stifnet.com
- DOC NO. BE0455062-B
CONTROL & PERIODIC MAINTENANCE
1) To ensure the functional integrity of the VIGIRO
®
SV26, you must scheduleperiodic inspections. The frequency of
inspections must be sufficient to avoid dangerous situations (situations that affect the intrinsic operation of the
VIGIRO
®
SV26).
2) During these inspections, check that the VIGIRO
®
SV26 is not affected by the following defects: dust layer >2mm,
fixing the axis of the VIGIRO
®
SV26, degraded or unfixed anti-rotation strap, non-operational power-on LEDs,
degraded electrical wiring, shocks on the envelope of the VIGIRO
®
SV26, etc...
3) In the case of one or more defects found, you must proceed with the restoration in order to correct the defect(s)
before you can use the bucket lift or belt conveyor again.
4) Only personnel trained and authorized in maintenance procedures forequipment are able to carry out inspections of
the VIGIRO
®
SV26.
5) The output of the VIGIRO SV26® remains closed for 9 seconds to allow the handling equipment to reach its rated
speed
DISPOSAL
When dismantling the VIGIRO
®
SV26, the user must ensure the proper disposal of this device and hand over to
the specialized harvesting centers the components according to their nature (stainless steel, electrical
equipment, seal, etc.).
In the event that the VIGIRO
®
SV26 is used, controlled, under conditions contrary to the precautions described in
this instruction manual, STIF declines all responsibility for damage caused to man, animal, environment, material
property.
