15
General safety notes
1.
The unit may only be connected to a power supply with voltage, current type and
frequency matching the specification on the type plate! Never pull the power plug
on the cord when unplugging it!
2.
Do not start operation of the unit if the power cord has been damaged or the
housing or the pressure hose shows sign of damage.
3.
Never connect the unit to compressed air!
4.
Operate only wirh pure brake fluid on glycol base (DOT 3, DOT 4, DOT 5.1).
Products containing mineral oil will destroy the unit!
5.
Before corrective maintenance, cleaning or repairs on electric devices, the user
must ensure that the device is without current, i. e. switched off and the power plug
pulled and the brake fluid has been drained from the unit.
6.
Repairs may only be performed by trained professionals with corresponding shop
equipment.
7.
Improper repair or handling may lead to significant hazards to the user and may
damage the unit. Unintended use or improper operation of the unit will void the
liability for possible damages.
8.
A function and leakage check must be performed after the repair of the unit has
been completed. It must be ensured herby that units for brake fluids are only
operated with brake fluid on glycol base (DOT 3, DOT 4, DOT 5.1). The use of
brake fluids not recommended will lead to the destruction of the unit.
9.
Do not
put oil, or gasoline, soaked rags on the bleeder unit because of fire hazard.
GB
