UHF
Desktop Reader
Installation instruction
UHF
Lecteur de table
Notice d’installation
UHF
Lector de mesa
Procedimiento de instalación
conforme con
NOM-024 -SCFI-2013
© STid - 20 PA des Pradeaux FR13850 Gréasque - NI1148C04- Page
1
sur
7
-
Ed. 04/01/2023
STid reserves the right to make change without notice, for the purpose of product improvement.
US
Product references
Characteristics
Communication: USB
Cable output: USB 2.0 cable
–
Length 1.50 m / 4.9 ft
–
Connector type A
:
Direct Current
Driver installation
Communication
Bidirectionnal: by default, the reader is delivered in bidirectional SSCP mode. More details about reader communication are
available in the protocol specification: Spec_Protocole_SSCP_UHF_INDUS-Vx.x.
Keyboard emulation: the reader can be used in keyboard emulation: wedge mode. See Configuring the reader in Wedge
mode.
Configuring the reader in Wedge mode
The readers can be configured with STid -USB Wedge Configuration tool available on download link:
https://stid.com/images/UWedgeConfv110_setup.zip
In this mode the reader emulates a keyboard and displays in the active window the characters received from the
serial link.
The reader is delivered with the default parameters in bold in the table.
1-
Set the options needed (if different than the defaults).
2-
Send the
‘
Keyboard emulation
ON’
command.
Command
Description of the command
Options
Update
Put the converter in update mode.
The
file
firmware.bin
is
supplied by STid.
Language (set)
Changes the keyboard layout.
-
Français (AZERTY)
-
English (QWERTY)
Type case (set)
Chooses whether the alphabetical characters
are displayed on the screen in uppercase or
lowercase.
-
Uppercase
-
Lowercase
Numlock (set)
Chooses which numerical keys are used: those
on the numerical keypad or those above the
alphabetical keys.
-
On (use numeric pad)
-
Off (use keyboard nb)
Info (get)
Shows the current configuration (version, baud
rate, etc.).
Timing (set)
Define the time between the sending of 2
characters.
Between 20ms and 1s
Carriage Return (set)
Switches the carriage return off or on or on with
release before key pressed.
-
Off
-
On
-
On + Released
SOF (set)
Add
the character “ –
“ at the beginning of the
frame.
-
Off
-
On
EOF (set)
Add the character “ . “ at the end of the frame
.
-
Off
-
On
Reset to default
Set the reader to factory default.
EPC Private key (set)
Set the user ID security reading mode.
-
Plain
-
Enciphered + value Private
key
Keyboard emulation
(set)
Enables / disables keyboard emulation mode.
-
Off (disable)
-
On (enable)
ARC-W45-G/U04-5AA1: 865 - 868 MHz
ARC-W45-G/U04-5AA1M: 865.7 MHz Morocco
ARC-W55-G/U04-5AA1: 902 - 928 MHz
ARC-W55-G/U04-5AA1AU: Australia
ARC-W55-G/U04-5AA1NZ: New Zealand
ARC-W55-G/U04-5AA1PE: Peru
ARC-W55-G/U04-5AA1PH: Philippines
Windows ≥ 10
:
Windows automatically detects the reader as a
‘USB COMP
OSITE
DEVICE’ and
installs the driver.
Windows < 10: the driver is automatically installed with a STid Software, if no STid software are installed:
-
to obtain the 2 drivers files:
cdc.cat
and
fsl_ucwxp.inf
.
-
Connect the reader to the USB port COM of PC.
-
Copy the 2 files in the directory: C:\Windows\INF.
