- 7 -
DELETE SENSOR
1. In PROGRAM mode simultaneously press and hold the acknowledge button and zone/
message selection button for three seconds.
2. Successful when receiver states, “Zone [number] is empty,” and green LED is off.
LOW BATTERY / TAMPER / OUT OF RANGE ALERT
The 4-Zone LED light indicator will turn yellow when maintenance is required on your sensor
(example: low battery or tampering with a sensor). The LED will remain on until the trouble
condition is cleared and a transmission is received. When replacing the battery in a sensor,
you will not need to reprogram into the receiver.
OPTIONAL LAMP CONTROLLER ACCESSORY
The Lamp Controller (STI-30104) plugs into the receiver output jack and will turn on a lamp any
time your sensor is triggered.
MOUNTING OPTIONS
The receiver can be mounted on a wall or set on a table with the provided stand.
WARRANTY INFORMATION
Safety Technology International, Inc. warrants to the
original
consumer/purchaser that
this product shall be free of defects in material and workmanship under normal use and
circumstances for a period of one (1) year from the original date of purchase.
Electronic warranty form at www.sti-usa.com/wc14.
