Operating Manual
STI-3030 | STI-3038LP
15
4.0 Transportation
4.1 General Notes
4.2 Transportation
4.3 Transportation by Vehicle
4.4 Operation Conditions
4.1
General Notes
Before the machine used for the first time, STI authorized dealers offer a course to familiarize
maintenance and operating personnel with all elements of the machine. We are not liable for
damage caused by incorrect use of the machine by personnel.
4.2 Transportation
In order to transport the machine from a vehicle to the working area, you need to tilt the machine
down. In order to do so, place the pocket weights in the weight baskets and tilt the machine back
so it rests on the back casters.
When transporting the machine with hoisting equipment like a crane or a lift, check the total weight
permitted. (See Chapter 1-dimensions) Please use only appropriate, allowed, and qualified hoisting
equipment as well as ropes and chains. You will find the weight of the equipment in chapter 1.
Do not fix any rope or chain to the handle. The machine must be placed on a pallet or platform
designed to hold the weight of the machine and the platform or pallet can then be lifted or hoisted
from the appropriate points.
***When transporting P/M machines by vehicle or trailer, it is
mandatory
to move all pocket weights
to the head of the grinder, or off the machine. Failure to do so will result in damage to the handle
frame that is not covered under warranty.
4.3
Transportation by Vehicle
When transporting the machine with vehicle, proceed in such a manner that damage due to the
effects of use of force or incorrect loading and unloading is avoided. Use straps to tighten the
machine to the cabin of the vehicle.
Use at least two straps, or tighten the machine with one strap to the cabin wall of the vehicle. Make
sure, that all parts of the machine are fixed.
4.4
Operation Conditions
Check the surface to be treated for loose parts (stones, screws, etc.). The surface must be swept
if necessary. Make sure that the machine can travel over all inequalities on the surface. Small
inequalities like floor joints less than ¼ inch are no barriers for the machine.
The machine must be operated in accordance with instructions given in Chapter 5—Initial operation.
