(1) Before opening the product, check that it has no wrinkles, folds or other issues.
(2) Please note that folding the product can cause issues such as wrinkling or cracking.
(3) Wrinkling, cracking, and other issues that occur during the application process may not be
covered by the warranty.
(4) Completely remove all wax from the area where the product is to be applied.
(5) Before applying the product, place it where it is to be applied and check its positioning.
(6) Remove all grease from the area where the product is to be applied and clean the area thoroughly.
(7) Perform the work indoors, in an area free of dust.
(8) Perform the work in a location in which the ambient temperature is 15°C (59°F) or above, and
make sure that the temperature of the vehicle and product are also 15°C (59°F) or above.
If performing the work in an environment with a temperature below 15°C (59°F), warm the
vehicle and the product to 25 to 50°C (77 to 122°F) before performing the work.
(9) Apply firm pressure to the garnish after applying it to the vehicle.
(10) After applying the garnish, do not wash the vehicle or expose it to rain for at least 24 hours.
(11) If chemicals such as wax or coating agents, or solvents such as gasoline or thinner, come in contact
with the garnish, they may result in staining or swelling. If any such chemicals or solvents
inadvertently come in contact with the garnish, immediately wipe them off.
(12) Do not perform work with hands which have been dirtied with oil, chemicals, etc.
1. Usage precautions
2. Product numbers and applicable vehicles
Part number
Part name
Applicable vehicle
SG990VA010
STI GARNISH LID RED
WRX S4/STI (VA) all models
3. Contents
Trunk lid garnish x 1 (one of the following two types)
SG990VA010
* Check that all of the above are included before beginning application.
If there are any missing or incorrect items, please inform the retailer from whom you purchased the product.
4. Tools
Scissors, ruler, marker, masking tape
Degreasing agent (recommended: nonane), rag, dryer (when applying the product in a location with an
ambient temperature below 15°C (59°F))
5. Appearance when applied
View of vehicle rear
Trunk lid garnish
-2-
Installation Procedures
