• Never attempt to modify this product. This may damage the product and may become cause of serious accidents.
· Be sure to stop the engine during work for safety reasons
.
· Be sure to tighten bolts and nuts firmly.
· Inspect the nuts and bolts after the first 60 miles (100 km) of driving after attaching them. Re-tighten them if necessary.
· If abnormal noise or vibration occurs while driving
,
pull over the car immediately to a safe place, and then inspect and
re-tighten the attaching bolts. If abnormalities persist
,
perform inspection and make necessary repairs immediately.
If you continue to drive in this condition, damages or accidents may occur.
· Stop using this product immediately
it it has defects such as deterioration and breakage
,
or receives a strong impact
,
as these conditions impair the product's original performance.
· Make sure that no part comes in contact with the battery while working.
Warning
· This product does not improve the limit performance significantly. Always drive safely
.
· Do not use this product on inapplicable vehicles or for purposes other than it is designed for. Doing so may result in
damages or accidents.
• Install this product in accordance with the service manual issued by SUBARU CORPORATION for your model. Also
make sure to adhere to the precautions described in this document.
· If bolts and nuts are not tightened with specified torque while installing this product, they may be damaged or become
loose. Make sure to tighten them with the specified torque.
· After installing this product, the fluid should be replenished or changed at a SUBARU dealer.
Caution
· SUBARU shall not be held liable for any direct or indirect damage due to failures or other malfunction caused by
incorrect installation or handling of this product.
· SUBARU does not honor warranty claims for malfunctions of products or vehicles that occur directly or indirectly due
to the installation of this product.
· Malfunctions of vehicles that could occur due to the installation of this product may not be covered by the
SUBARU vehicle warranty
.
· When replacing parts with this product, be sure to use genuine SUBARU parts for non-reusable parts, consumables,
oil and grease.
· Product specifications are subject to change without notice.
· Installation of this product may cause deterioration in ride comfort or significant changes in driving characteristics.
*Advice
Part Number
：
SG990VA010
Production Date : September,2021
△
0
Installation and Operations instructions for Trunk Lid Garnish
• Thank you for purchasing this product.
• This manual provides installation and handling instructions for this product, and precautions to be observed.
• Before using this product, be sure to read "Safety Precautions" and use the product properly.
• Keep this manual in a safe place, such as the glove box, and refer to it whenever necessary.
Important precautions are indicated with the following marks. Be sure to observe those precautions
.
Warning
Precautions that you must observe for your safety
.
[Failure to observe these precautions may result in death or serious injury.]
Caution
Precautions that you must observe for your safety and for your vehicle.
[Failure to observe these precautions may result in damages or accidents
.
]
*
Advice
Information that you should familiarize yourself with
.
Information that are useful.
- l -
210805
