STI J1210VA500, Инструкция по установке и эксплуатации, Страница: 3 / 4

3
5. Installation main points
① Door
H andle Cup protector
★This document demonstrates the left front side. Perform the work on the other doors similarly.
★Read this document completely to the end and perform the work when you understand the overall work
procedure.
Cut position
White film
Figure 1
(1) Preparation
1) Divide the whi te film (release paper) on the back side to
upper and lower halves. (Figure 1)
i) Turn over the white film half way. (Figure 2)
ⅱ) Cut the white film with scissors. (Figure 2)
ⅲ) Paste the cut white film back onto the DGKHVLYH surface. Note
which side is front or the back. (Figure 3)
Note the
front and
back
Stick the half-cut
white film back onto
the part
in its
original position.
Turn over the
white film
and
cut it in
half.
Figure 2
4. Installed view
Figure 3
Cut
Cut