STI FKF 200, Руководство по сборке

Страница: 8 / 48

8
Field width
Field height
Lip (Collector covering)
Collector field dimensions
Collectors which are mounted side by
side in one row are always connected
by means of stainless steel expansion
joints on the manifolds (see photo).
Horizontal section across a collector field
Vertical section across a collector field
In case of multi-row installations, the
collectors will always be mounted
on joint on top of each other. The
lip (collector covering) of the upper
collector has to be put onto the lower
collector. The lip (collector covering)
of the lower collector has to be
clamped into the joint area to ensure
an optimum water flow.
1300002 collector connection set hydraulical