_____________________________________________________________________________________
STI S.r.l.
– Via Dei Caravaggi 15, 24040 Levate (BG) – ITALY www.imi-critical.com
Manual 4049, rev. 00 05/2017
– FTC
- 7 -
6 TRANSPORT
Warning
The following instructions must be respected:
-
operations must be carried out only by skilled operators;
-
always wear protective clothing, gloves, and eyewear to prevent personal
injury. Check with your process or safety engineer for any additional
measures that must be taken to protect against process media.
Important
The lifting and handling should be made in compliance with the laws and
provisions in force.
7 RECEPTION
FTC smart positioner leave the factory in perfect condition. Performances of each unit are guaranteed by
tests and data reported on a specific Test Report. At the reception of the FTC smart positioner:
-
check that the model correspond with that of order confirmation;
-
check that the FTC smart positioner has not been damaged during transport.
8 STORAGE
A proper attention must be observed about the FTC preservation during the storage period. If the FTC
smart positioner has to be storage before installation:
-
place it in a dry and clean place and take all necessary measures to avoid contact with dust, dirt,
humidity, corrosive gases or vapours;
-
make sure that connection protections and/or covers will not be removed during the storage;
-
the storage temperature shall be between -20°C and +40°C.
