© copyright Sti Srl - Rev. 0408 Vietata la divulgazione c/o riproduzione anche parziale
5
7. INSTRUCTIONS FOR USE
7.1 Preparation
•
Open the cap (12) and fill the cold water tank with
tap water
.
•
Connect the plug to a socket on a patchboard provided with a switch with an efficient earth connec-
tion.
The appliance is provided with a power cord according to its electrical input character-
istics.
It’s important to verify that the electrical mains are according to the norms
It is recommended that the power supply of this appliance includes a differential switch
of 30 mA maximum
7.2 Starting
•
For power supply, switch on the main switch (1)
•
The indicator light (5) goes on
•
When the pump has filled up the boiler and goes out, switch on the boiler switch (2).
•
The appliance starts heating up (about 8 minutes comby 4000; 5 minutes comby 9000).
•
The indicator light (8) goes on ; the appliance is ready for use now.
•
Connect the steam hose to the socket (13), making sure that it is inserted correctly.
•
Push the steam button (B) on the handle and direct the steam jet towards the area which has to be
cleaned.
•
For vacuum cleaning press the button for suction (A) on the handle.
•
The functions steam and vacuum can be used separately, and also simultaneously
7.3 Detergent injection
To start the appliance follow the instructions explained under starting (7.2)
For the detergent function follow these instructions:
•
Open the tap (11) and fill up the tank with detergent.
•
Switch on the switch (3)
•
Push the bottom (C) to start the detergent function.
•
The functions steam, steam + detergent and vacuum can be used separately, and also simultane-
ously
Before starting steam cleaning, blow off the initial condensation in the conducts in a
bucket or any other suitable place.
Do not use foaming or corrosive detergent, as this kind of detergent could damage the
appliance !