STF-Filtros FMA-2000 series, Инструкция по установке, эксплуатации и обслуживанию

Страница: 23 / 47

Installation, operation and maintenance manual - FMA 2000
Ref: 2000/CPF01/230/VH 23
12. – CONTROL PANEL
When a FMA-2000 filter model is supplied, all the electrical connections between the control
panel and the actuators have already been installed and checked by the manufacturer.
The equipment supply is 230V CA, 50Hz in a standard way. In case of variants, this should be
checked with the manufacturer
BEWARE!
DURING THE STARTING, IT SHOULD BE CHECKED THAT THE ENGINE
TURNING CORRESPONDS WITH THE FILTER PROGRAMMING IN
PANELS WHICH ARE SUPPLIED BY TRIPHASE CURRENT.
DESCRIPTION
The different monitoring and control components can be found in the control panel :
 Pilot lights:
o
Green: It turns on when there is energy.
o
Yellow: It turns on when a backwashing cycle is produced.
o
Red: It turns on when there is an alarm.

The push button has two functions:
o
To generate a manual backwashing cycle.
o
To rearm the equipment when it fails.
 Thermic magnet (IC).
o
1 + N, 10A C

Differential (DIF).
o
1 + N, 40A 30 mA.
 Power supply (FA).
o
230 V / 24 VCC (1ª)

A relay that can be programmed(LG).
o
EASY 24V DC 8entries / 4LCD outputs.
The messages that appear in the relay that can be programmed are specified in section 12.2 and
13.