StewMac JHS 808, Руководство по сборке

Страница: 3 / 12

Parts list
Resistor values are indicated by colored bands, read from left
to right. The first color in the code is usually the one painted
closest to a lead wire. When a gold or silver band is present,
it’s always one of the last colors in the code. A magnifier is
a big help in reading these codes.
stewmac.com
©2017 Stewart-MacDonald page 3 of 12
(1) On-Off-On solder lug toggle
(1) DC power connector (2.1mm)
(1) Footswitch (3PDT, latching)
(1) Metal case with 4 screws
(1) Circuit board
(Not pictured)
(Not pictured)
(1) C7 Capacitor (.047 µF)
(1) LED mounting bezel (5mm)
(2) Mono jacks, 1/4"
(1)
D1
Diode (P6KE22A)
(3) D2, D3, D7 Rectifiers
(2)
C6, C13
Capacitors (1 µF)
(2)
D4, D5
Red LEDs (5mm)
(1) D8 Clear LED (5mm, glows yellow)
(1) U1 Low noise op-amp (4558P 500nA)
(1) U1.2 socket for op-amp
(3) C2, C12, C14 Capacitors (.1 µF)
(1) C5 Capacitor (.027 µF)
(1) C8 Capacitor (51 pF)
(2)
C1, 15
Capacitors (10 µF)
parts:
i-2150 808
10uF
(1)
R11
Pot (500 kΩ, linear taper)
(1) R18 Pot (100 kΩ, linear taper)
(1)
R14
Pot (5 kΩ, linear taper)
(1) R4 Resistor (2.2 MΩ)
Red Red Black Yellow Brown
(2) R1, R2 Resistors (47 kΩ)
Yellow Purple Black Red Brown
(5)
R3, R5, R12, R16, R17
(1 kΩ)
(5) R7, R8, R13, R20, R22 (10 kΩ)
Brown Black Black Red Brown
(1) R9 Resistor (4.7 kΩ)
(1) R10 Resistor (51 kΩ)
Yellow Purple Black Brown Brown
Green Brown Black Red Brown
Brown Black Black Black Brown
(1) R21 Resistor (100 Ω)
(1) R23 Resistor (47 Ω)
Yellow Purple Black Gold Brown
Green Brown Yellow Gold
(2) R6, R19 Resistors (510 kΩ)
Brown Black Black Brown Brown
Red Red Black Black Brown
(1) R15 Resistor (220 Ω)
.22J63
47NJ
NPO 51J
27nJ63
100uF
(2) C3, C4 Capacitors (100 µF)
(2)
C9, C10
Capacitors (.22 µF)
(1) Ribbon cable
(2) Q1, Q2 Transistors (2n3904)
(1) Lead wire (12")
(4) Adhesive foam tape
(3) Control knobs
.1J63
1J63
(1) On-Off-On solder lug toggle
(1) DC power connector (2.1mm)
(1) Footswitch (3PDT, latching)
(1) Metal case with 4 screws
(1) Circuit board
(Not pictured)
(Not pictured)
(1) C7 Capacitor (.047 µF)
(1) LED mounting bezel (5mm)
(2) Mono jacks, 1/4"
(1) D1 Diode (P6KE22A)
(3)
D2, D3, D7
Rectifiers
(2) C6, C13 Capacitors (1 µF)
(2)
D4, D5
Red LEDs (5mm)
(1) D8 Clear LED (5mm, glows yellow)
(1) U1 Low noise op-amp (4558P 500nA)
(1) U1.2 socket for op-amp
(3)
C2, C12, C14
Capacitors (.1 µF)
(1) C5 Capacitor (.027 µF)
(1)
C8
Capacitor (51 pF)
(2) C1, 15 Capacitors (10 µF)
parts: i-2150 808
10uF
(1)
R11
Pot (500 kΩ, linear taper)
(1)
R18
Pot (100 kΩ, linear taper)
(1)
R14
Pot (5 kΩ, linear taper)
(1) R4 Resistor (2.2 MΩ)
Red Red Black Yellow Brown
(2) R1, R2 Resistors (47 kΩ)
Yellow Purple Black Red Brown
(5) R3, R5, R12, R16, R17 (1 kΩ)
(5)
R7, R8, R13, R20, R22
(10 kΩ)
Brown Black Black Red Brown
(1) R9 Resistor (4.7 kΩ)
(1) R10 Resistor (51 kΩ)
Yellow Purple Black Brown Brown
Green Brown Black Red Brown
Brown Black Black Black Brown
(1) R21 Resistor (100 Ω)
(1)
R23
Resistor (47 Ω)
Yellow Purple Black Gold Brown
Green Brown Yellow Gold
(2) R6, R19 Resistors (510 kΩ)
Brown Black Black Brown Brown
Red Red Black Black Brown
(1)
R15
Resistor (220 Ω)
.22J63
47NJ
NPO 51J
27nJ63
100uF
(2) C3, C4 Capacitors (100 µF)
(2) C9, C10 Capacitors (.22 µF)
(1) Ribbon cable
(2)
Q1, Q2
Transistors (2n3904)
(1) Lead wire (12")
(4) Adhesive foam tape
(3) Control knobs
.1J63
1J63