13
Stewart Filmscreen –
WallScreen 2.5
EYE BOLT MOUNT (HANGING)
NOTE: Professional mounting techniques should be used. Stewart Filmscreen cannot be
liable for substandard or faulty installations. Failure to comply with the instructions and
guidance contained in this manual may result in voiding your warranty.
1.
Attach the screen to the frame (see pages 15-16).
2.
Use the Eye Bolt Mount to suspend the screen. Eye bolts are already secured to the frame
making your WallScreen ready for installation to an appropriate surface (see Figure 11).
Note:
On some custom sized frames the use of additional “back support braces” is required. These
vertical support braces assure parallel top and bottom frame member alignment once the screen has
been attached to the frame. If back braces are included, do not install the screen/frame without
required back braces.
⚠
CAUTION
‣
Be careful not to touch or scratch the viewing surface.
‣
A false ceiling is not intended to support the weight of a WallScreen. Contact a Stewart
representative for more information.
Figure 11: Eye Bolts Mounted Securely to the Frame
