Stewart Filmscreen Cabaret, Руководство пользователя

Страница: 24 / 37

Stewart Filmscreen
– Cabaret
24
IR WALL SWITCH AND REMOTE FOR LED (IF EQUIPPED)
An 11-button IR (infrared) remote control (see Figure 26) is supplied in conjunction with the IR wall
switch (see Figure 29) for the ILC (see Figure 27). Instead of receiving an IR receiver eye inside the
case, you will get a wall switch with the eye built in.
GETTING STARTED
Making the Connections
5. Locate the RJ25 accessory plug cable on the back of the
Cabaret on audience right side (see Figure 28).
6. Connect the male RJ 25 accessory plug cable into the IR
wall switch female RJ25 port (see Figure 30).
7. Install the IR wall switch anywhere in the room, making sure
that there are no obstructions between the eye and the
screen.
8. Please note that you may want to hide the cable inside your
wall to ensure a clean install.
Note: Cabaret may come with one RJ25 male output (if
equipped). The maximum length of the RJ25 cable plugged
into the unit shall not exceed 50’.
Figure 30: Rear of IR wall switch
with RJ25 input
Figure 29: Front of IR wall switch