6
Stewart Filmscreen Corporation
Installing the high voltage switch control (standard)
A standard 3-position wall switch is supplied. The high-voltage control is
connected to the electrical source. It alternates directions of screen motion by
means of the hot lead, using the 3-position switch.
Preparing the connection
Before making the electrical connections, you need:
An available AC constant power source
A 4-conductor romex or motor connector cable
Making the connections
The diagram in Figure 6 illustrates the connections.
1. Connect the wall switch to the AC constant power source.
2. Connect the wall switch to the screen’s electrical box.
125v AC Power Source
COMMON-White (Neutral)
UP-Red
DOWN-Black
GROUND - Green
Line (Hot)
Figure 6:
High voltage control wiring diagram
AC Power Source
Yellow
Содержание Stealth Trapdoor Electriscreen
Страница 19: ...MAINTENANCE NOTES ...
Страница 20: ...www stewartfilm com 1 800 762 4999 Fax 310 326 6870 ...